Setup Guide

8
Installing Display Packs
blu™ 6-Pack POS Setup Guide
• Removeunitfromboxandlayat
ontherearsidewiththedisplay
cavityfacingupwards.Remove
frontbluetrimasshowninthe
visualopposite.
• Usingthescrewdriverprovided,
removeeachscrewfromthe
frontfasciabyturningthescrew
an-clockwiseasshowninthe
visualopposite.
• Carefullyremoveclearfront
fascia.
• Usingtheprovideddouble-
sidedtape,peelonesideand
pressrmlyinthecenterofthe
rearfaceofthepack.Peelthe
remaining side of tape and press
packrmlyintocavityasshown
inthevisualopposite.Note:The
le(larger)cavityisforthemy
bluDeviceKitandtheremaining
5xcaviesarefortheMyblu
PodPacks.