User's Manual

14
Chapter 3
Additional information
Technical specifications
Inputs Mic 1 & 2 Type Balanced microphone
Connector Female XLR
Sensitivity -6 dB ~ -50 dB
Other 3-Band tone control
Phantom power (15V DC)
Talkover
Channel 1 Type Balanced stereo line
Connector Female XLR (2x)
Sensitivity +4 dB ~ -20 dB
Other Mono / Stereo switch
Channel 2 to 4 Type Unbalanced stereo line
Connector Female RCA (2x)
Sensitivity +4 dB ~ -20 dB
Bluetooth Type Integrated Bluetooth receiver
Mixed with Channel 3
Connector Male SMA connector
Other Included antenna
Front line input Type Unbalanced stereo line
Mixed with Channel 4
Connector 3.5 mm stereo jack
Priority mute contact Type Priority mute
3-pin terminal block (2 signal / 1
ground for PRE126) ~ 3.81 mm
Bluetooth pair contact Type Bluetooth pair contact with LED
3-pin terminal block ~ 3.81 pitch
Outputs Type Balanced stereo line (2 x for PRE126)
Connector 3-pin terminal block ~ 3.81 pitch
Frequency response 20 Hz - 20 kHz
Signal to Noise ratio > 90 dB
Total Harmonic Distortion + Noise < 0.05%
Crosstalk > 70 dB
Controls Front panel control
Bluetooth receiver Bluetooth spec V4.1
Class 2 output power