User manual IMEO2 2 1 3 audac.
ADDITIONAL INFORMATION This manual is put together with much care, and is as complete as could be on the publication date. However, updates on the specifications, functionality or software may have occurred since publication. To obtain the latest version of both manual and software, please visit the Audac website @ www.audac.eu.
Table of contents Introduction 05 Professional soundbar ����������������������������������������������������������������������������������������������������������������������� 05 Precautions 06 Chapter 1 08 Connections and connectors ����������������������������������������������������������������������������������������������������������� 08 Chapter 2 09 Overview IMEO2: Front ���������������������������������������������������������������������������������������������������������������
Introduction Professional soundbar The IMEO2 Soundbar features a slim and elegant design and includes all required functions for expansion of any audiovisual system with an impressive sound, while having a minimal hassle for installation. It’s perfectly suited for installations such as classrooms, presentation rooms or meeting rooms where it can be used and installed in combination with screens, smartboards or projectors. The acoustics originate from a 3-way speaker construction, composed of two 1.
Precautions READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY ALWAYS KEEP THESE INSTRUCTIONS. NEVER THROW THEM AWAY ALWAYS HANDLE THIS UNIT WITH CARE HEED ALL WARNINGS FOLLOW ALL INSTRUCTIONS NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR SPLASHING LIQUID. AND NEVER PLACE AN OBJECT FILLED WITH LIQUID ON TOP OF THIS DEVICE NO NAKED FLAME SOURCES, SUCH AS LIGHTED CANDLES, SHOULD BE PLACED ON THE APPARATUS DO NOT PLACE THIS UNIT IN AN ENCLOSED ENVIRONMENT SUCH AS A BOOKSHELF OR CLOSET.
CAUTION - SERVICING This product contains no user serviceable parts. Refer all servicing to qualified service personnel.
Chapter 1 Connections and connectors CONNECTION STANDARDS The in- and output connections for AUDAC audio equipment are performed according to international wiring standards for professional audio equipment 1. 3.5 mm Jack (AUX): For unbalanced line input connections Tip: Left Ring: Right Sleeve: Ground Tip: Signal Sleeve: Ground 2. RCA (COAXIAL): For coaxial SP/DIF digital input connections 3. TOSLINK (OPTICAL) For optical SP/DIF digital input connections 3.
Chapter 2 Overview IMEO2: Front 2 1 4 3 1) Status indicator LED’s: 2) Remote control (IR) sensor: These LED’s indicate the current operation status of the IMEO2.Various color LED’s indicate following statuses: The remote control (IR) sensor is located behind the front grill of the IMEO2. This sensor requires a line-of-sight connection with the remote control. Make sure this sensor is not covered or blocked. • Red: Standby mode • Green: (Blinking) USB / (Illuminated) AUX (3.
Overview IMEO2: Rear 5 6 7 8 9 10 5) AC Power inlet connection: 8) USB socket: The mains power supply (100-240V AC - 50/60 Hz) has to be applied to this AC power inlet. The connection is made by an IEC C8 power connector and the power lead is standard fitted, but can be unplugged for convenient assembly. The USB connection allows connection to memory devices. This allows previously stored audio sources to be played back (MP3, FLAC, WAV).
Overview IMEO2: Remote control 1 2 USB 3 4 5 The IMEO2 includes an IR remote controller, which allows the operation of it from a distance of 6 meters. 4) Playback control buttons: buttons: allows to increase or decrease the volume level. VOL+ / VOL- 1) Power button: Switches the sound bar between ON and STANDBY mode. buttons: allows to skip to the previous and next tracks (only in Bluetooth mode) Toggles the status between Mute music or resume the sound.
CONNECTION STANDARDS First time use: The remote control has a pre-installed lithium CR2025 battery. Remove the protective tab to activate the remote control battery. 1 2 4 3 4 Replace the remote control battery: The remote control requires a CR2025, 3V Lithium battery. To replace this battery, follow the steps as below: • Push the tab on the side of the battery tray towards the tray • Slide the battery tray out of the remote control • Remove the old battery.
Chapter 3 Placement and mounting The IMEO2 offers possibilities for placement on a leveled surface underneath / in front of the TV, display or projection surface. An included mounting bracket offers possibilities for secure wall mounting, above or underneath the TV, display or projection surface. Table Standing Bottom Wall Mount Top Wall Mount The special mounting bracket consists of a wall support bar and two fixation hooks which comes default assembled to the sound bar.
1. Attach the wall support bar The first step is the mounting of the supplied wall support bar on the desired location on the wall. The support bar has to be fixed to the wall by four screws which need to get fitted through the provided slots. The provided slots have an elliptical shape, allowing the possibility for slightly adjusting the position to make it perfectly level. Make sure the appropriate fasteners are used, depending on the mounting surface (brick, concrete, wood, ...
Chapter 4 Connecting Using the HDMI (ARC) socket The ARC (Audio Return Channel) function allows you to send audio from your ARC compliant TV to your sound bar through a single HDMI link. To enjoy the ARC function, please ensure your TV is both HDMI CEC and ARC compliant and set up accordingly. HDMI AR C COAXIAL OPTICAL SE RV ICE ON LY AUX When correctly set up, you can use your TV remote control to adjust the volume output (VOL +/- and MUTE) of the sound bar.
Using the optical socket The optical socket allows connection of the sound bar to the optical output of your TV or receiver. Simply connect using an optical (Toslink) cable. Remove the protective cap before connecting. HDMI AR C COAXIAL OPTICAL SE RV ICE ON LY AUX A B Using Bluetooth The first time when your Bluetooth portable device is connected (smartphone, tablet, ...) it needs to get paired. For getting it paired, the sound bar shall be switched ON and in Bluetooth mode.
Chapter 5 Additional information UPDATE Before updating the IMEO2, the new software must be obtained. This software can be found at https:// audac.eu/software. The downloaded files, ending in .bfu, must be copied exactly to a USB stick. Before the update can be carried out, the IMEO2 has to be switched to USB mode. The USB stick can be inserted into the USB port and the update will start automatically. All the lights will be on during the update process.
HOTEL MODE In installations with multiple IMEO2’s installed throughout the building, it can be desirable to assign custom Bluetooth ID’s to distinguish them from each other. Typical applications are hotels, conference rooms, schools, ... The hotel mode function in the firmware offers a solution for these applications. Using the hotel mode, the Bluetooth ID can be adjusted to ‘AUDAC - IMEO2 + xxxx’ where ‘xxxx’ is a 4-digit number, representing the room number, class number, meeting room number, ...
Technical specifications Inputs Type Stereo unbalanced line (AUX) Connectors 3.5mm jack connector Sensitivity 500 mV Type Coaxial SP/DIF digital input Connectors RCA Type Optical SP/DIF digital input Connectors Toslink Type HDMI ARC Connectors HDMI 19-pin Type USB Connectors USB-A Output power 2 x 15 Watt RMS (Left & Right) 30 Watt RMS (Subwoofer) Frequency response 40 Hz - 20 kHz THD+N 1% (1 kHz, 1W) Bluetooth Remote control Power consumption Version V3.
Caution: This device complies with Part 15 of the FCC rules and Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment.
