Product Manual

800-833-0478 | www.harmar.com | | Ramps Installation Manual

SAFETY

Have a qualied assistant present when using this or any other

portable ramp

Ensure the top of the ramp is secure. The top where the ramp

sits on the step or landing must be secure before using. It may be

necessary to anchor the top of ramp to the landing surface with

the steel pins provided.

Follow all chair or scooter manufacturer recommendations for

your specic mobility device.

NEVER exceed a slope greater than 1-inch rise to 1-foot length

How to Unfold a Harmar Multi-Fold Ramp

Step 1

Place the ramp approximately at its length out from the step,

van, or platform.

Stand the ramp up on end with the open ends down and the

handle side toward you.

Reach down and lift the rst half of the ramp toward the

step or landing area and set it down on top of the support.

Press the hook rmly against the step.

Step 2

Open top half of ramp.

Step 3

Unfold top half of ramp towards you and again ensure that

the ramp hooks are pressed rmly against the landing area.