Technical data

PVI 3000/4000/5000/5300 Installation and Operation Manual
37
There are three possible warning messages that may be displayed with different failures. These messages occur in grid
feeding mode. When EEPROM message is displayed, the system is unable to access the EEPROM. The COMM message
means a failure of the communication function. The FAN BLOCK message shows that the fan has stopped running. These
warnings could appear one after the other.
The messages for the fault mode are as follows. It shows the fault mode, serial number of the inverter, software versions of
the sequential and current controllers and then the error messages which are listed in the Error Message Table on section 4.1.
3 seconds ↓
M ode Fault
S / N XXXXXXXXXXXX
W arning
F AN BLOCK
W arning
C OMM
W arning
E EPROM
M ode Derat ing
V acH
M ode Derat ing
P ac
M ode Derat ing
I ac
M ode Derat ing
I pv