Technical data

PVI 3000/4000/5000/5300 Installation and Operation Manual
12
98.43
Fig 2.2.1 Remove the bracket from the inverter
1. Use the bracket (Fig 2.2.2) as a template to mark the locations on the wall where holes should be drilled. After
drilling the holes, the mounting bracket should be fastened to the wall with screws or screw-anchors as shown in
Figure 2.2.3.
Fig 2.2.2 The mounting bracket and its dimensions
2.75
in.
7.5”
4.94”
7.12”
2.75”
4.75”
1.75”
20.67”
9.88”
15.94”
Mounting flanges
Mounting flanges
Mounting slots for securing the inverter
4
0
5
m
m
525mm
4
4
m
m
70mm
125mm
180mm
250mm
70mm
120mm
190mm