Technical data

PVI 3000/4000/5000/5300 Installation and Operation Manual
11
Fig2.1.1 Clearances recommended for PVI 3000/4000/5000/5300 inverter installation
Mounting details
The steps listed below describe how to mount the inverter on the wall:
- After taking the inverter out of the cardboard box, you will find the bracket in the bag behind the heatsink. First, the
bracket needs to be removed from the inverter as shown in the figure 2.2.1 below.
20”
7.5”
39”
20”
36” min
39”
7.5”
wall
VOLTAGE AND FREQUENCY LIMITS ARE
SET TO THE CURRENT UL1741 STANDARD
AT TH E TI ME OF SH IP ME NT . R E FE R TO
MANUAL FOR VOLTAGE AND FREQUENCY
SETTING FOR THIS MODEL CHANGES TO
THESE SE TTI NGS CA N BE MADE ONLY BY
AN AUTHOR IZED INSTA LLER.
WARNING
BOTH AC AND DC VO LTAGE SOURCES ARE
TERMINATED INSIDE THIS EQUIPMENT.
EACH CIRCUIT MUST BE INDIVIDUALLY
DISCONNECTED BEFORE SERVICING.
DO NOT REMOVE COVER UNTIL 5 MINUTES
AFTER DISCONNECTING A LL SOURCES OF
SUPPLY.
WHEN TH E P H OT OV OLTA IC ARRA Y IS
EXPOSED TO LIGHT, IT SUPPLIES A DC
VOLTAGE TO THIS EQUIPMENT.
DO NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE. REFER
SERV I CIN G TO Q UAL IF IE D S ER VICE
PERSONNEL.
RISK O F EL EC TRIC AL S HOCK
Normally Grounded Conductors May Be
Ungrounded and Energized When a
Ground- Faul t is Ind ic at ed."
GFDI Fuse
For continued protection against risk of fire,
replace only with same type and ratings of fuse.