Installation Manual

91009-60, 91009-48
8/8/2016 JRW Page 3 of 3 91009I
Wiring Installation
Note: Some trucks will recognize the tailgate light bar as a trailer or will not have a towing
package. If desired, a separate connector can be purchased from Putco Part# 8726F. This
connector will allow you to bypass/add the trailer connector and wire the light bar into your
factory taillights.
1. Plug the 4 pin connector on tailgate light bar into the 4 pin trailer connector on truck.
2. Wire reverse light (white wire) into the reverse light on 7 pin trailer connector (Middle Pin) or into
factory reverse light (White Light) using a supplied Scotchlok.