Installation Guide

Silver-Lux / Silver-Lux Pro

11/21/2016 - JW Page 1 of 2 SLX-INST

Silver-Lux Installation Instructions

Congratulations on your purchase of a high quality PUTCO product. Should you

need any application or technical assistance, feel free to call us at: 1-800-247-3974

Monday-Friday 8:00 a.m. - 5:00 p.m. (Central Standard Time)

Contact your PUTCO dealer for other quality accessories.

Please read all instructions before installation and to check to see that all parts are included.

Silver-Lux Installation

1. Fan out copper braids and attach the driver to the bulb. Attempt installation without the

anti-flicker harness first (if supplied). If you notice a flicker in the headlights during

operation of the vehicle, install anti-flicker harnesses onto the bulbs as shown in Figure

(Representative image only. Actual bulb may differ.)

2. Replace existing bulbs with the Silver-Lux LED bulbs.

a) If your vehicle is equipped with cover to seal the bulb, you may need to tuck the anti-

flicker and driver harnesses into the headlight assembly before you install the Silver-

Lux bulb. Tuck the braids into the headlight housing as shown in Figure 2 and

replace cover to seal the headlight.

KIT CONTENTS:

Description

Qty

Silver-Lux / Silver-Lux Pro Bulbs

Driver Harness

Anti-Flicker Harness (Not included in H16 and 30XXXX Kits)

Hex Wrench (Not included in H16 Kit)

Figure 1

PAGE 1
Silver-Lux / Silver-Lux Pro Silver-Lux Installation Instructions Congratulations on your purchase of a high quality PUTCO product. Should you need any application or technical assistance, feel free to call us at: 1-800-247-3974 Monday-Friday 8:00 a.m. - 5:00 p.m. (Central Standard Time) Contact your PUTCO dealer for other quality accessories. Please read all instructions before installation and to check to see that all parts are included.
PAGE 2
Silver-Lux / Silver-Lux Pro Figure 2 b) If your headlights leave the back of the bulb out in the open, cable tie the driver and anti-flicker harnesses into a safe location so they are not able to interfere with any moving parts in the engine compartment. Silver-Lux Adjustment (Clocking) **Bulbs come clocked for typical applications** 1. To clock the bulbs and find the optimal light output, start by leaving the factory bulb in one headlight and replace the opposite bulb with the Silver-Lux.