Specifications

8
b) Open Internet Explorer, and enter “http://192.168.2.10:88” to access and log into the camera.
Note: The default user name and password for login are both “admin”.
c) Skip the wizard. If you’re prompted to install the add-on, “H264 Streaming Viewer”, please install it.
d) Select “Config.” and go to “Network”  “Wireless”.
e) Click “Scan” to search all available wireless access points / networks (SSID), and double-click the one your
camera is intended to configure for.
Note: This method is available only when the signal strength of the wireless access point / network
your camera is intended to configure for is not too weak, and it’s set to open for searching.
If this method is not working, please manually add the wireless profile as described in
“APPENDIX 6 ADDING WIRELESS PROFILE MANUALLY” at page 39.
f) The setting for the selected wireless access point / network will be shown except for the “Key” column.
Enter the password to access the selected wireless access point / network in “Key”, and click “Save”. The
selected wireless access point / network will be added to “Profile Name List” and activated.
g) Close Internet Explorer, and disconnect the wireless network on your laptop.