Specifications

13
Step3: Open Internet Explorer on your laptop / computer, and enter the IP address and port number you just
found in the URL column to access this camera.
The format is http://ipaddress:portnum, such as http://192.168.30.155:88 in our example.
In the login page, enter the user name, password, and security code to access.
Note: Please skip the wizard.
Step4: Go to “Config.”  “Wireless”, and in the setting page, switch from “DHCP” to “Static”.
Change “Server IP”, “Gateway”, and “Port” as needed.
 “Server IP” is the IP address you’re currently using for this camera.
 “Gateway” is the IP address you note down in Step2.
 “Port” is the port number you’re currently using for this camera. The default value is “88”. If you change it in Step2, please
change the value here accordingly.
Step5: Go to “Config.”  “DDNS”, and enable the DDNS service.
 If your router supports UPnP, please proceed Step6.
 If your router doesn’t support UPnP, note down the host name, such as MAC00199425784f.ddns.eagleeyes.tw, and click
“Save”. Then, access your wireless router for port forwarding as instructed in “APPENDIX 5 CONFIGURE PORT
FORWARDING” at page 38.