Specifications

1.4 Connect Camera to the Internet (WAN)

You may use your laptop / computer, or your iPhone / iPad / Android mobile device to complete the network

configuration of the camera.

 If you don’t have iPhone, iPad or Android mobile device, go to “1.4.1 Configure on Laptop / Computer” at page 12.

 If you have iPhone / iPad, go to “1.4.2 Configure on iPhone / iPad” at page 15.

 If you have Android mobile device, go to “1.4.3 Configure on Android mobile phone or tablet” at page 17.

Note: The HTC Android mobile devices do not support this function. Please go to “1.4.1 Configure on

Laptop / Computer” at page 12 to configure your camera to Internet.

1.4.1 Configure on Laptop / Computer

Before configuring this camera on your laptop / computer, make sure:

 The Windows operating system of your laptop / computer is Windows 7, Vista or XP.

 You’ve connected the camera to a wireless network as instructed in “1.3 Connect Camera to Wireless

Network (LAN)”.

 (Recommended) Your wireless router supports UPnP, and this function is enabled.

Note: If your wireless router doesn’t support UPnP, you need to additionally access your router for port

forwarding. For details, please refer to “APPENDIX 5 CONFIGURE PORT FORWARDING” at page

38.

 You have downloaded “IPScan.exe” in your laptop / computer.

Note: Please download “IPScan.exe” from www.surveillance-download.com/user/n812.swf.

Connect a camera to the Internet

Step1: Connect your laptop / computer to the same wireless network as the camera connected.

Step2: Open “IPScan.exe” ( ) to search your camera, and:

 Note down the IP address and port number after search, such as “192.168.30.155” and “88” in our example.

 Select the IP address, and click “Configure” to note down the gateway IP address. It’s the address of your wireless router,

and you might need it later for port forwarding.

 Change the port you’re using for this camera to other value (such as “8080”) in “Web Port” if you know the default port

number “88” is blocked by your Internet service provider or phone carrier. Then, enter the user name (admin) and

password (admin) to confirm.

The number of “80” is not recommended to use since some Internet service providers and phone carriers might block the

use of “80”.