Installation Guide

6
Assembly Of Quartz Sleeve & UV Lamp
4) Slowly slide lamp down into Quartz
Sleeve
Brass End Nut
(screws down onto Stainless Steel Nipple)
Locking Nut
5) UV Lamp Shroud
(slides down over Brass End Nut)
End nut under shroud
1) Locking Nut
(fasten top bracket onto UV Chamber)
2) Quartz Sleeve inserted into UV Chamber
Quartz Sleeve Black O-Ring
Locking Nut
3) UV Lamp Harness Cable
with Lamp Connector
UV Lamp inserted into Quartz Sleeve
with 4 Pin
Brass End Nut