Owner`s manual

3070 CENTER CONSOLE
Chapter 8:
VENTILATION SYSTEM
8.1 Head Compartment Ventilation
Port Window
The port windows are secured by cam action locks. The locks should be adjusted so they are tight
enough to seal the windows in the closed position, but not so tight that they break the plastic. The
cam locks are adjusted by turning the two allen head bolts located at the base of each cam lock.
8.2 Bilge Compartment Ventilation
All 3070 Center Console models are equipped with ventilation for the bilge compartment. A flow
of air into the bilge compartment is provided by four vents located on either side of the cockpit,
under the gunnel boards. This provides adequate air movement in the bilge compartments.
8.3 Maintenance
• Periodically lubricate all hinges and latch assemblies with a light oil.
• Periodically clean and coat gasket materials with silicone to help keep them pliable.
• The opening port windows and windshield are made of acrylic plastic glass. Acrylic glass
scratches easily. Never use a dry cloth or glass cleaning solutions on acrylic glass . Use a
soft cloth and mild soap and water for routine cleaning. Solvents and products containing
ammonia can permanently damage acrylic glass. Please refer to the Routine Maintenance
chapter for more information on the proper maintenance for acrylic plastic glass.
8-1