Owner`s manual

2270 CENTER CONSOLE
Chapter 1:
PROPULSION SYSTEM
1.1 General
The Pursuit 2270 Center Console is designed to be powered with twin 2-cycle or 4- cycle outboard
motors. Most 2-cycle outboard motors use an oil injection system. Oil is automatically injected in
the engines and mixed at the proper ratio from two oil tanks located behind access hatches in the
stern compartment.
Note: Always monitor the oil level in the tanks and only use the type of oil specified by the
engine manufacturer.
4-cycle outboard engines do not use an oil injection system and are not equipped with remote oil
tanks. They have an oil sump in the crankcase that must be kept full of the type of oil recommended
by the engine manufacturer. The oil must be checked before each use and changed regularly.
Each manufacturer of the various outboard motors provides an owner’s information manual with
its product. It is important that you read the manual very carefully and become familiar with the
proper care and operation of the engine and drive system. A warranty registration card has been
furnished with each new engine and can be located in the engine owner’s manual. All information
requested on this card should be filled out completely by the purchaser and then returned to the
respective engine manufacturer as soon as possible.
1-1