PURPLE LEAF Cantilever Umbrella Assembly and Operation Manual E Series 10'×10' Square ©Copyright 2016-2023 Purple Leaf Inc.
CHECK LIST A ×1 B ×1 C ×1 F ×4 (M8×14) G ×8 (Ø8) H ×4 (M8×20) D ×1 I ×1 E ×1 J ×1 (M8×20) 2 *black bolts
K ×1 N ×1 (T6) L ×1 M ×1 3
1 Base Tube Assembly Option 1 Cross Base Adding something heavy on cross base like water tank. H G C B A Notice: Make sure you have enough space to operate the pedal before installation.
1 Base Tube Assembly F *black bolts G D E 5
1 Base Tube Assembly Option 2 Inground Base gently (Sold Separately) put it down Filling the bottom of the hole with gravel.
Base Tube Assembly 1 C H G C D F *black bolts G 7
1 Base Tube Assembly Option 3 Baseplate (Sold Separately) 4.44 in Ø1/2 in 29 6.
1 Base Tube Assembly H G C D *black bolts F G ×16 Use 1/4 inch -diameter galvanized/stainless lag screws to mount the plate to the deck(included in the package).
1 Base Tube Assembly Important Prior to assembly, it is important to choose the location of the umbrella. •Allow ample height to avoid damage to your umbrella during assembly and usage. •Choose a location that is level and sturdy. •Consider a location that will maximize the umbrella’s rotating swivel function. Placing the umbrella between two entertaining areas is ideal. •To avoid personal injury or damage to the umbrella, make sure the area around you is clear from any outdoor structure or furniture.
Umbrella Assembly 2 Two-persons recommended for team lift and to complete assembly. Insert the main pole onto the base tube(D) with the cover plate(E) and part I installed. Screw part J and connector knob(L) to stabilize the umbrella.
2 Umbrella Assembly K L 12
Umbrella Assembly 2 13
3 Operation CAUTION: Stop turning the crank handle as soon as the umbrella cover is completely open and the sleeve on the umbrella pole has reached its maximum height. IMPORTANT: PRIOR TO USING THE TILT FUNCTION. To avoid personal injury or damage to the umbrella, make sure the area behind you is clear and free from any furniture or structure.
Operation 3 To Open Canopy 1. Slide the umbrella handle to the top of the pole by squeezing the trigger. 2. Insert the hand crank(M) into the small hole of the handle on the post. Be sure to remove all the protective material inside. push eze sque the er trigg lift Note: Be mindful of the packaging in the umbrella canopy. It Must be removed before opening.
3 M 16 Operation
Operation 3 To Tilt Canopy Press on the handle trigger and move the handle up and down to adjust the angle of the umbrella canopy. IMPORTANT: PRIOR TO USING THE TILT FUNCTION. To avoid personal injury or damage to the umbrella, make sure the area behind you is clear and free from any furniture or structure.
3 Operation To Rotate Umbrella Please hold the handle and the support arm to rotate the umbrella while stepping on the pedal.
Operation 3 To Install Umbrella Light (Sold Separately) 19
4 Notification WARRANTY Frame Frames are warranted to be free from defects in materials and workmanship for a period of one year. Damage to frames or welds due to improper assembly or exposure to water and subfreezing temperatures is not covered. Fabric Fabric is warranted for a period of three years. Fading or discoloration resulting from exposure to the elements, chemicals, or from spills is not covered.
Notification 4 SAFETY PRECAUTIONS Close the umbrella in windy conditions or when a storm approaches. Never allow the umbrella to flap in the wind. This could damage the canopy. Properly store umbrella when not in use. Close umbrella, and cover umbrella with a protective cover(not included). Do not leave an open umbrella unattended. If damage occurs, this is not covered by the warranty. W h en a d jus t i n g th e um brel l a, make sure t hat no person(s) or item(s) is close to the umbrella.
4 Notification Care And Maintenance When not in use, close and cover umbrella with a protective cover(sold separately). If necessary, clean the fabric with lukewarm water. Allow a wet canopy to dry slightly opened, but do not leave unattended. Wipe sliding marks on the aluminum poles with a damp cloth. Winter Storage: Store in A Dry Place.
Attention 5 Umbrella base tube have 2.5° backward to the vertical for engineering purpose. 2.5° Part C won't be rotatable before the installation of umbrella. If the umbrella is hard to be rotated, close and operate it like this may be helpful.
Purple Leaf Inc. 1820 E Locust St, Ontario CA, 91761, US umbrella5@purpleleafgarden.com ©Copyright 2016-2023 Purple Leaf Inc.
