User's Manual

4
Administrator password
Set the password to enter the Setup menu
User password
Set the password to enter the Setup menu and machine startup
HDD Security Configuration
Set the hard disk protection password
Secure Boot
Secure Boot switch control sub-menu, this item should be Enabled
when installing Windows 10 UEFI mode. When installing Legacy
(non UEFI) system, such as DOS, Windows 8, this item should be
Disabled, otherwise the system cannot be installed or booted.
Note: Please remember the password you set, otherwise it will bring you unnecessary losses.
Save & Exit menuAfter completing the relevant settings, choose to exit BIOS Setup.