Specification Sheet

6200 Maple Avenue / Dallas, Texas / 877-733-8022 / www.purewaterbaths.com Rev04252016
PRODUCT SPECIFICATION
The spa bath shall have an outer dimension of 35
1
/
2
” in width, 71
3
/
4
” in length and 23
5
/
8
” in height. Product shall be made of reinforced cast acrylic with a pre-leveled, thermoformed ABS base. The spa
bath jet system shall consist of six (6) or eight (8) Pipeless™ jets with removable jet and impeller assemblies, with an Elite Hydromassage System. Product shall be independently certified by NSF
International for health and sanitation characteristics under Protocol P182. The following wetted component parts shall be serviceable and accessible from inside of bathing vessel: control panel,
control modules, jet bodies and motors. The spa bath may be specified with an optional decorative finish drain / overflow, grab bars and ChromaSoothe light(s). Product shall be a Purewater Baths
Cierra with an Elite Hydromassage System and ____ jet configuration.
NOTE:
Dimensions may vary +/-¼" (7 mm). Service access panel may be required by
local codes.
Model/System Selection
q
Cierra–EliteHydromassageSystem:8Jets
q
Cierra–EliteHydromassageSystem:6Jets
Options and Upgrades
q
ChromaSootheLightingSystemwithcolorwashsetting
and seven solid light colors
m
SingleLightSystem
m
DualLightSystem
q
Decorativefinishcable-operateddrainwithoverflow
m
Polished Chrome
m
OilRubbedBronze
m
Brushed Nickel
m
White
m
Biscuit
q
Ergonomicgrabbars:Two12”grabbars
m
White
m
Biscuit
m
Black
q
Tile Flange Kit
q
Colors available
m
White
m
Biscuit
m
Black
C
NSF Protocol P182
Pipeless™ Hydromassage Jets
19 1/4"
23 5/8"
71 3/4"
4"
11"
17 3/4"
35 1/2"
21 1/4"
52 1/2"
4"
4"
Control PanelChromaSoothe Light
[ 54 cm ]
[ 183 cm ]
[ 28 cm ]
[ 11 cm ]
[ 11 cm ]
[ 46 cm ]
[ 91 cm ]
[ 11 cm ]
[ 134 cm ]
[ 49 cm ]
[ 60 cm ]
Overflow
Drain

Dimensions/Shape
•Width35
1
/
2
”(91cm),Length71
3
/
4
”(183cm),Height23
5
/
8
”(61cm)
•Rectangulardesign
Primary Bathing Design
One-person bath
Installation Types
Drop-in,undermountandthree-wallalcove
Drain Location
End-drain
Material
Structurallyreinforcedcastacrylic
Construction
Self-containedspabathmountedonpre-leveled,
thermoformedABSbase
Recommended Plumbing Requirements
•WaterSupply:
3
/
4
”N.P.T.
•Drain:1
1
/
2
”O.D.
Water Capacity
Operating57U.S.Gallons(216liters);Min.39U.S.Gallons
(148liters);Max.85U.S.Gallons(322liters)
Electrical Requirements
Hard-wired,115VAC,60Hz,15ampdedicatedcircuit,
GFCIprotected
Shipping
•ShippingDimensions:Width40”(102cm)×Length24”
(61cm)×Height80”(203cm)
•ShippingWeight:225lbs(102kg)
Warranty
•Residential:LimitedLifetimeShell/5-YearPartsLimited
•Commercial:1-YearShell/1-YearPartsLimited
Listings and Certification
Specifiedmodelsmeetorexceedthefollowing:
Specificationssubjecttochange without notice.