Spa Bath Owner’s Manual Signature Collection Designer Collection “Elite” Designer Collection “Essential” TO BE REMOVED FOR USE BY THE OCCUPANT
Dear Customer, Thank you for purchasing a Purewater® Pipeless Whirlpool Bath. By selecting a Purewater Baths® pipeless system, we believe that you have chosen the safest, most dependable and luxurious whirlpool bath available. This manual will help you learn how to install, operate and maintain your new pipeless whirlpool bath.
Table of Contents Letter From Purewater Baths.......................................................................................02 Important Safety Instructions......................................................................................04 Pipeless Whirlpool Bath Operating Instructions............................................................05 Command Pad Functions: Signature and Designer “Elite” Command Pad......................
Important Safety Instructions Instructions pertaining to a risk of Fire, Electric shock or injury to persons. SAVE THESE INSTRUCTIONS WARNING: When using this unit, basic precautions should always be followed, including the following: 1 READ AND FOLLOW ALL INSTRUCTIONS. 2 WARNING: Risk of accidental injury or drowning: Children should not use a hydromassage bathtub without adult supervision. 3 WARNING: To avoid injury, exercise care when entering or exiting the hydromassage bathtub.
Pipeless Whirlpool Bath Operating Instructions Your Purewater Pipeless Whirlpool Bath is designed to be filled with fresh water then drained after each use. Certification by NSF International ensures that your Pipeless System can be effectively cleaned and disinfected by simply following Purewater Baths’s Disinfection Protocol on Page 12.
SIGNATURE AND DESIGNER “ELITE” COMMAND PAD 1 STANDBY Mode LED Indicator Indicates the system is ready to operate. 2 OFF Button Turns the jets OFF and returns the system to STANDBY. 3 LIGHT Button Used to control the optional mood light. • Press the “Light” button to turn on the mood light • The light displays 7 vivid colors and 2 sequencing settings. • To change the light color, press the “Light” button to turn it off and after one second press it again to turn it on.
DESIGNER “ESSENTIAL” SPA BATH COMMAND PAD Your “Essential” Whirlpool Bath provides spa-quality bathing delivered by Pipeless Jets for an invigorating, strong or soft, soothing experience… you choose. HIGH | LOW | OFF Simply press the button on the command pad to turn on “All Jets” to their highest flow setting. Press the button a second time to adjust “All Jets” to the low flow setting. Press the button a third time to turn the system “Off.
Pipeless Whirlpool Bath Installation Instructions WARNING When using electrical products, basic precautions should always be followed, including the following: 1 IMPORTANT: Read complete instructions before beginning installation. 2 DANGER: RISK OF ELECTRIC SHOCK. Connect only to a dedicated 15 amp. circuit protected by a ground fault circuit interrupter. Grounding is required. This unit should be installed by a qualified service representative and grounded.
Electrical Requirements A 115 VAC, 15 AMP, 60 HZ., dedicated circuit connected to a Ground Fault Circuit Interrupter (GFCI) is required. The GFCI should be mounted for easy access in the event a manual reset is required, and should never be mounted underneath the tub. If the GFCI is located on a bathroom wall, it should be positioned such that it is not accessible by the tub’s occupant. SERVICE LOOP REQUIRED The electrical installation of the bath unit requires that an electrical Service Loop be provided.
Typical Installations The entire bottom surface of the tub base must be supported. To accomplish this, a bed of mortar or low shrinkage plaster can be applied under the tub base at the time of final setting. The amount of material used should be sufficient only to level the bath unit and not to raise it. Level the bath unit along the top edge of the rim when the setting bed is applied. Allow the setting material to set completely before applying weight to the bath.
Plumbing All Purewater® Pipeless Whirlpool Bath units are factory tested for proper operation and watertight connections prior to shipping. Prior to installation, the bath must be filled with water and operated to check for leaks that may have resulted from shipping damage or mishandling. If leaks are detected, notify Purewater Baths’s customer service department. Do not install the unit.
PUREWATER BATHS Pipeless Disinfection Protocol IMPORTANT! TOTAL DISINFECTION REQUIRES TWO DISTINCT STEPS Remove residue with thorough and effective cleaning. Disinfection: Apply an EPA registered disinfectant, covering 100% of all surface areas for the required contact time, to kill bacteria, viruses and fungi. 1) PREPARATION & CLEANING a. Drain the bathing well of all water. 1 b. Rotate the jet assembly to remove from jet case. d.
LIMITED RESIDENTIAL WARRANTY Pipeless Spa Baths PRODUCTS COVERED: Spa baths manufactured by Purewater Baths and put to residential use. PERSONS COVERED: The original purchaser for residential use (Customer). WARRANTY PERIOD: Non-transferrable, Limited Lifetime warranty on the tub shell and five (5) years on all other parts and components. The warranty period begins on the date of original purchase for use or two (2) months after the product leaves Purewater Baths’s facility, whichever comes first.
LIMITED COMMERCIAL WARRANTY Pipeless Spa Baths PRODUCTS COVERED: Spa baths manufactured by Purewater Baths and put to commercial use. PERSONS COVERED: The original purchaser for commercial use (Customer). WARRANTY PERIOD: One (1) year on all parts and components beginning on the date of original purchase for use or two (2) months after the product leaves Purewater Baths’s facility, whichever comes first.
This page intentionally left blank.
Product Specifications Are Subject To Change Without Notice. Purewater Baths® has obtained applicable code listings generally available on a national basis for products of this type. It is the responsibility of the installer/owner to determine specific local code compliance prior to installation of the product. Purewater Baths® makes no representation or warranty regarding, and will not be responsible for, any code compliance.
