User Manual

13
Mask Function
The Mask feature of Surveillance System allows the user to mask areas in the field of
vision of Surveillance System, allowing the user to define the environment that they do
not wish to observe. For example, you wish to observe your office but not the moving
traffic seen from the office window. You can mask the office window so Surveillance
System will not detect and record the traffic. But if there is movement outside the
masked area, Surveillance System will start to record.
Add mask
Cut mask
Clear mask
Fast Key Reference:
F1  F6 Lock Camera(1 to 6) (2/4/6 Port)
Numeric Keypad 1,2,3..0 : Lock Camera(1 to 10), Quad Processor 4/9/16 Frames.
F1  F6 Lock Camera(11 to 16), Quad Processor 4/9/16 Frames.
“Shift”” F1””F6” Switch to View Log (2/4/6 Port)
“Ctrl”Numeric Keypad 1,2,3..0 : Switch to View Log (1 to 10), Quad Processor
4/9/16 Frames.
“Ctrl”F1  F6 Switch to View Log (11 to 16), Quad Processor 4/9/16
Frames.
“CTRL””S” Start Monitor
“CTRL””P” Stop Monitor
Numeric Keypad “” Zoom In
Numeric Keypad”” Zoom out
Numeric Keypad”” Start/Stop Scan
”PageDown””PageUp”Scroll camera in lock mode