User Manual

10
[Video Format]
Choosing Video Format will invoke a video format dialog box provided by the
camera/capture device driver. You should choose a format supported by Surveillance
System! from this dialog box; such as RGB24.
[Video Source]
Most capture device drivers will provide a video source dialog box. Within this box, the
user can choose the signal format (NTSC, PAL, etc.) and adjust the image
characteristics (brightness, contrast, hue, etc).
[Capture Driver]
If you install the video switch box, you need to select MSVideo:BT848/878 capture
card. If you install the PCI interface 6 port card, you need to select the Aver Security 6
Eyes MJPEG card.
[Mask Visible]
You can disable to display the mask area mark in every camera window
[File Location]
Log file path to keep acquired video data, click Set Location to Add/Delete file path.
[Start Monitor After]
This is the time delay allowing you to leave the field of vision before observation
begins.
[Password]
You may set the password to prevent someone walk to your place to terminate
Surveillance system running. This password is also applied to the remote login.