User Manual

6
Lock Camera (Zoom in/Zoom out)
You can select any one of the camera to Zoom in or Zoom out, just press the icon
between "-" and "x" or press the function key F1 to F6, F1 represent to camera 1. You
can press the tool bar icon to zoom in or zoom out, or use the numeric keypad "-", "+".
You can press the ESC key to back to the default display status.
Scan Camera
When the lock function is active, you may enable the scan function by press the "*" key
in the numeric keypad or press the icon, you can also press the manual bar Camera
function->Scan lock. Scan will automatically switch each existing camera every 3
seconds.
Start Monitor
You can start all the cameras or any one to start to observe and record. You can press
from manual bar, tool bar icon or mouse right button to start any one of the installed
cameras. If you have predefine your schedule, you can use Schedule Start to apply your
schedule. Only Schedule Start will reference the schedule.
Stop Monitor
You can stop all the cameras or any one to stop observe and record. You can press from
manual bar, tool bar icon or mouse right button to start any one of the installed cameras.