User Manual

3
3. The Setup program will detect your Dungle and your Windows’s language then
display the following dialog:
4. If the dialog displays the right path and language that you want to install, please
press YES. Otherwise, you may install the language you want, please reference the
previous chapter for detailed information.
5. We recommend you to install “Multi-Cam Surveillance System” in the local PC,
which connect to the video camera. “MultiCam Remote View” should be installed in
another PC. If you need the remote view function, the local and remote PC should
either have the modem or network installed. To install the “Remote View ” in another
PC, please reference the previous chapter for detailed information.
6. You may add the ”MultiCam Surveillance System” to the Windows start up folder in
the following dialog box during installation:
7. Follow the instruction to finish.
8. Start manual->Programs->MultiCam->MultiCam Surveillance System to run the
GeoVision MultiCam Surveillance System
MultiCam Surveillance System Operation Guide
It is a PC-based surveillance system allows you to display/record simultaneously on
your PC. This solution is as portable as a PC, yet more powerful and configurable than
most permanently installed system. The system uses motion detection technology, only
the moving objects will be recorded, save the time and cost of continuous recording as
traditional surveillance system does.
System Requirements:
Intel Pentium 200 or above, PentiumII 350 is recommended.
Microsoft Windows 98.
Video input: Different kinds of capture cards.
Audio output: sound card (optional)
Hard disk space: Plenty of disk storage for recording. At least 1GB per camera.