User Manual

&Dn DTR Option
&D0 Ignore an on-to-off transition of DTR.
&D1 Switch to on-line command mode
without disconnection.
Mn Speaker Control
M0 Speaker is always off
M1 Speaker ON until CONNECT
M2 Speaker is always on.
M3 Speaker off during dialing and receiving
carrier and turn speaker on during
answering.
On Return to On-Line Data Mode
O0 Go on-line
P Set Pulse Dial
(for phone line that does not support
touch-tone dialing)
Vn Result Code Form
V0 Numeric codes
V1 Verbal codes
Zn Soft Reset and Restore Profile
Z0 Restore stored profile 0 after warm
reset.
Z1 Restore stored profile 1 after warm
reset.
Chapter 3
&Cn Control Carrier Detect (CD) Signal
&C0 CD override
&C1 Normal CD operations
11
10