User Manual

i
Pan-European ApprovalPan-European Approval
Pan-European ApprovalPan-European Approval
Pan-European Approval
The equipment has been approved in accordance
with Council Decision 98/482/EC for pan-
European single terminal connection to the public
switched telephone network (PSTN). However,
due to differences between the individual PSTNs
provided in different countries, the approval does
not, of itself, give an unconditional assurance of
successful operation on every PSTN network
termination point.
In the event of problems, you should contact your
equipment supplier in the first instance.
WW
WW
W
arning Notice to Aarning Notice to A
arning Notice to Aarning Notice to A
arning Notice to A
ustralian Userustralian User
ustralian Userustralian User
ustralian User
ss
ss
s
All telecommunications devices are required to be
la belled with a Telecommunications Compliance
Label, ensuring their compliance with ACA
Technical Standards. To ensure continuing compli-
ance to A C A Technical Standards, please ensure
the following AT commands are maintained:
ATB0 (ITU/CCITT operation)
AT&G (No Guard tone)
AT&P1 (33/36 pulse dial make/break
ratio)
ATS0=0 (No answer or answer greater
than 1ring) or ATS0>1
ATS6=N (Blind dial delay - acceptable
range is 2-5 seconds)
ATS11=95 (DTMF period between 70-
255ms)