User's Manual

4
Chapter 2
InstallationsInstallations
InstallationsInstallations
Installations
This chapter describes how to install and power
on you fax modem.
Hardware InstallationHardware Installation
Hardware InstallationHardware Installation
Hardware Installation
Before complete the hardw are installation
be aware not to power on the modem
1. Plug the male end of the
RS-232RS-232
RS-232RS-232
RS-232 cable into
the connector marked
RS-232RS-232
RS-232RS-232
RS-232 ( ) on the
back of the modem.
2. Plug the other end of this cable into the
serial port on the back of your computer.
3. ( Be sure your modem is Pow er off ) Plug
the pow er cable into the
AC-INAC-IN
AC-INAC-IN
AC-IN connector
( ) on the back of the modem.
e
f
4. Plug the power adapter into a w all outlet.