User Guide

Figure 2 - Filter Tap Installation Diagram

Filter Tap Installation Diagram

Note:

• Allow extra free space around the system to avoid accidental impact.

• Where line pressure exceeds 500 kPa, an approved pressure limiting device must be installed to comply with

Australian & New Zealand Plumbing Standards. (Ref. AS/NZS 3500.1-2003, Clause 3.3.4)

Z2 Cartridge

HOT COLD

¼" Tube

(not included)

Minimum 70 mm clearance

for cartridge changes.

Reducer

⅜" Stem x ¼" Tube

Reducer

⅜" Stem x ¼" Tube

Head Assembly