User Guide

4 Installation & Operation Manual Copyright © Puretec Pty Ltd 2022
Figure 1 - Mixer Tap Installation Diagram
Z2 Cartridge
HOT COLD
Braided Hose
(not included)
Minimum 70 mm clearance for
cartridge changes.
Note:
• Allow extra free space around the system to avoid accidental impact.
• Where line pressure exceeds 500 kPa, an approved pressure limiting device must be installed to comply with
Australian & New Zealand Plumbing Standards. (Ref. AS/NZS 3500.1-2003, Clause 3.3.4)
Brass Stem
Adaptor
Mixer Tap Installation Diagram
Brass Stem
Adaptor
Head Assembly