User Guide

10 Installation & Operation Manual Copyright © Puretec Pty Ltd 2022
Cartridge Changeout
1. Shut off water supply and release the water pressure by opening up the tap.
2. Remove all packaging from the new cartridge, including any wraps or caps (if
applicable).
Replacement cartridge code for Z2-HFR model: Puretec Z2-R.
3. Rotate the old cartridge counterclockwise 1/4 turn, pull it out and dispose of it.
4. Insert the new cartridge into the filter head and rotate clockwise 1/4 turn until the
arrows on the head and cartridge align.
5. Turn on the water and check for leaks. If leaks occur, repeat step 2 & 3. If leaks persist,
discontinue use and call your supporting dealer.
6. Flush filter for 5 minutes before use or until water runs clear.
Cartridge Changeout