Daim Ntawv Qhia Tus Neeg Siv

3 Irrigation Sediment Removal Filters Copyright © Puretec Pty Ltd 2023
Important Information
IMPORTANT INFORMATION!
Installation Requirements
• System Max Pressure Rating : See model specification table.
• DO NOT overtighten when connecting the filter to the piping. Too much
tape or over tightening may cause the product to split.
• Use PTFE thread seal tape on all connections. Use of pipe
sealants will void warranty.
• Ensure correct inlet/outlet orientation
• Use on cold water line only.
Installation Note: A water filter system/tap, like any product, has a limited
life and may eventually fail. Also sometimes failure happens early due to
unforeseen circumstances. To avoid possible property damage, this product
should be regularly examined for leakage and/or deterioration and replaced
when necessary. A drain pan, plumbed to an appropriate drain or outfitted
with a leak detector, should be used in those applications where any leakage
could cause property damage, and/or the water supply should be turned off if
no one is home/present.
Cleaning
• The filter requires cleaning when the pressure drop between the inlet
and outlet reaches 0.5-0.6 bar (7-8 psi).