Multipure Aquasource Better Water Throughout the Home Installation, Operation & Maintenance Manual 7251 Cathedral Rock Drive • Las Vegas, NV 89128 • 800.622.9206 www.multipure.com • headquarters@multipure.
Table of Contents About the Multipure Aquasource 1 Before You Begin 1 Multipure Aquasource Parts List 2 Specifications 3 Multipure Aquasource Installation Overview 3 Installation 4 Maintenance 6 Warranty 7 Other Multipure Products 8 About the Multipure Aquasource Whole House Water Treatment System Thank you for your purchase of Multipure’s Aquasource Whole House Water Treatment System.
• • • • • • • • • • Replacement filters can be purchased directly from Multipure. For the latest prices, please visit our website at http://www.multipure.com/store/. The Multipure Aquasource Whole House System uses a set of 3 identical replacement filters (Model Nos. CB20 or CB20LSI). Actual filter life depends on the amount of water used and the level of particulate matter in the water being processed. See 2.1: Regarding Filter Capacity for additional details.
Specifications Model Name AQSOURCE2 (optional AQSOURCELSI2) Replacement Filter Type: Model CB20* (optional CB20LSI) Approximate Capacity: 30,000 gallons per cartridge* Approximate Flow Rate @ 60 psi: 10-12 gpm** Housing Composition: 304 Stainless Steel Rubber Items: Silicone Inlet: 1” Outlet: 1” System Size: 41” h x 16” d System Weight (without cartridges): 120 lbs. Filter Cartridge Size (each): 20” h x 4.
Installation THE MULTIPURE AQUASOURCE WATER TREATMENT SYSTEM MUST BE INSTALLED BY A LICENSED PLUMBER IN ACCORDANCE WITH ALL APPLICABLE PLUMBING CODE. The following are guidelines for installing the Multipure Aquasource to the main water supply line for the whole house. If you have questions regarding the installation of your Multipure Aquasource Whole House Water Treatment System, please contact your plumber and/or call Multipure Customer Service by phone at 1.800.622.9206 or by email at custsvc@multipure.
2. 3. Close all of the faucets in the house to avoid back flow of water. Disconnect the water line. If a pressure regulator is installed, disconnect the line after the regulator. 4. If necessary, install additional plumbing to enable a valve connection to bypass the Multipure Aquasource system on the water supply line. 5. Connect the outflowing water line (the water line going into the house) to the 1” OUTLET port of the Multipure Aquasource housing.
Maintenance Regarding Filter Capacity 1. 2. 3. The Multipure Aquasource Whole House Water Treatment System uses filter Model No. CB20 (optional: CB20LSI). Exact filter capacity varies in proportion to the amount of water used and the level of particulate matter in the water being processed.
4. 5. 6. 7. 8. b. Make sure that all 3 cartridges are fully inserted, and that the white gasket around the filter cartridge nipple is in complete contact with the receptor hole. NOTE: All 3 filter cartridges must be used for proper function of the Multipure Aquasource. Failure to properly insert all 3 filter cartridges may result in water bypassing the filters and passing through the Multipure Aquasource unfiltered.
Other Multipure Products Multipure offers other drinking water and water treatment devices designed to improve the quality of your water. The following products are just a sample of those available from Multipure. For additional information or for a complete listing of products, please visit www.multipure.com or contact us by phone at 1.800.622.9206. Multipure Aquaversa (SKU# MP750SB) The Aquaversa features a stainless steel housing and is designed for installation versatility.
Be sure to replace your filter at least once a year or sooner, if needed. Date of Installation: System Model Number: Filter Type: Dates of Filter Change To order a Replacement FIlter Call 800.622.9208 or www.multipure.com/rf.htm 7251 Cathedral Rock Drive • Las Vegas, NV 89128 • 800.622.9206 www.multipure.com • headquarters@multipure.
