User Manual

Performance Data Sheet
Multi-Pure Drinking Water Systems have been tested and certified under NSF/ANSI Standard Nos. 53 as
shown below. The concentration of the indicated substances in water entering the system was reduced to a
concentration less than or equal to the permissible limit for water leaving the system, as specified in
NSF/ANSI 53, Health Effects.
For Model Nos. MP880SB, MP880SC, MP880SI, MP880EL
22
XV. Performance Data Sheet
Substance
Percent
Reduction**
Influent challenge
concentration
Maximum
permissible product
water concentration
ALACHLOR*
>98%
0.05 0.001
ARSENIC (pentavalent As (V); As (+5); arsenate @ 6.5 pH
>99.9%
0.050 +/- 10% 0.010
ARSENIC (pentavalent As (V); As (+5); arsenate @ 8.5 pH
>95.8%
0.050 +/- 10% 0.010
ASBESTOS
>99.9%
10
7
to 10
8
fibers/L; fibers
greater than 10 micrometers in
length
99% reduction
requirement
ATRAZINE*
>97%
0.1 0.003
BENZENE*
>99%
0.081 0.001
BROMODICHLOROMETHANE (TTHM)*
>99.8%
0.3 0.015
BROMOFORM (TTHM)*
>99.8%
0.3 0.015
CARBOFURAN (Furadan)*
>99%
0.19 0.001
CARBON TETRACHLORIDE*
98%
0.078 0.0018
CHLORDANE
>99.5%
0.04 +/-10% 0.002
CHLOROBENZENE (Monochlorobenzene)*
>99%
0.077 0.001
CHLOROPICRIN*
99%
0.015 0.0002
CHLOROFORM (TTHM)* (surrogate chemical)
>99.8%
0.45 +/- 20% 0.080
Cryptosporidium (CYST)
>99.99%
minimum 50,000/L 99.95%
CYST (Giardia; Cryptosporidium; Entamoeba;
Toxoplasma)
>99.99%
minimum 50,000/L 99.95%
2, 4-D*
98%
0.11 0.00017
DBCP (see Dibromochloropropane)*
>99%
0.052 0.00002
1,2-DCA (see 1,2-DICHLOROETHANE)*
95%
0.088 0.0048
1,1-DCE (see 1,1-DICHLOROETHYLENE)*
>99%
0.083 0.001
DIBROMOCHLOROMETHANE (TTHM;
Chlorodibromomethane)*
>99.8%
0.300 0.015
DIBROMOCHLOROPROPANE (DBCP)*
>99%
0.052 0.00002
o-DICHLOROBENZENE (1,2 Dichlorobenzene)*
>99%
0.08 0.001
p-DICHLOROBENZENE (para-Dichlorobenzene)*
>98%
0.04 0.001
1,2-DICHLOROETHANE (1,2-DCA)*
95%
0.088 0.0048
1,1-DICHLOROETHYLENE (1,1-DCE)*
>99%
0.083 0.001
CIS-1,2-DICHLOROETHYLENE*
>99%
0.17 0.0005
TRANS-1,2- DICHLOROETHYLENE*
>99%
0.086 0.001
1,2-DICHLOROPROPANE (Propylene Dichloride)*
>99%
0.08 0.001
CIS-1,3- DICHLOROPROPYLENE*
>99%
0.079 0.001
DINOSEB*
99%
0.17 0.0002
EDB (see ETHYLENE DIBROMIDE)*
>99%
0.044 0.00002
ENDRIN*
99%
0.053 0.00059
Entamoeba (see CYSTS)
99.99%
minimum 50,000/L 99.95%
ETHYLBENZENE*
>99%
0.088 0.001
ETHYLENE DIBROMIDE (EDB)*
>99%
0.044 0.00002
**Percent reduction reflects actual performance of Multi-Pure product as specifically tested (at 200% of capacity).
Percent reduction shown for VOCs* reflects the allowable claims for Volatile Organic Chemicals/Compounds as per
Tables. Chloroform was used as a surrogate for VOC reduction claims: the Multi-Pure Systems’ actual reduction rate
of Chloroform was >99.8% as tested (at 200% of capacity).