Multipure ® Multipure Drinking Water Systems Aquamini Owner's MAnuAl Please retain this manual for future reference. Multipure International l P.O. Box 34630 l las Vegas, nV 89133-4630 l Phone 702.360.8880 l Toll-Free 800.622.9206 www.multipure.
Multipure Drinking Water Systems Thank you for selecting a Multipure Drinking water system to meet your need for quality drinking water. You have acquired one of the finest drinking water treatment devices available for the reduction of a wide array of contaminants. we are confident that your Multipure system will make a difference in your life. Thank you for your business. Table of Contents About 3 Before You Begin 3 Specifications 3 Installation Overview and Part Numbers 4 1. 2. 3.
About the Aquamini Drinking Water System • • • The Multipure Aquamini Drinking water system (Model# AQuAMInI) is designed for use on the countertop next to the sink. It connects to the existing faucet with a diverter valve that allows free selection between filtered and unfiltered water. The Aquamini includes all the accessories and fittings required for installation. If installation or operation assistance is required, please contact your Multipure Independent Distributor.
Aquamini Installation Overview & Part Numbers Diverter Valve Aquamini 1 1 Diverter Valve 2 3 4 5 6 7 Part Numbers 1. 2. 3. 4. 5. 6. 7. 8.
1. Installation 1.1: Inspect Your Drinking Water System 1. 2. 3. Inspect your Dws to confirm that it has been received in good condition and that all parts are included. Determine a countertop location for system placement, factoring in distance to the faucet for diverter valve and hose connection. Inspect the system housing to confirm that the housing top and bottom are securely connected. 1.2: Connecting the Hose and Diverter Valve to the Faucet 1.
1.3: Preparing and Operating Your Drinking Water System 1. using a paper towel or cloth, dry off all connections and the Dws housing. 2. Make sure that all connections are tightly secured. 3. Purge any air from the unit. a. Press the right button on the diverter valve to select the filtered water spout. The water will flow through the Dws and emerge from the smaller opening on the diverter valve. b. Allow water to flow through the Dws and filtered water spout for five minutes. c.
2.3: Installing the New Filter 1. If you have not done so already, remove the plastic wrapper and instruction wrap from around the new filter. 2. Align the threaded hole of the new filter cartridge onto the inside thread of the top half of the Dws. rotate the cartridge clockwise to tighten (if facing the inside of the top half of the housing). Make sure that the cartridge is threaded properly and straight. DO nOT OVerTIGHTen. 3.
3 .
3.
Be sure to replace your filter at least once a year or sooner, if needed. Date of Installation:________________________________________ Unit Model Number:_______________________________________ Filter Type:______________________________________________ Dates of Filter Change To order a Replacement Filter Call 800.622.9208 or www.multipure.com/rf.htm Multipure International The las Vegas Technology Center 7251 Cathedral rock Drive las Vegas, nV 89128 800.622.9206 toll-free 702.360.8880 phone 702.360.
