SDS

SAFETY DATA SHEET
PURELL® Healthcare HEALTHY SOAP™ Gentle & Free Foam
Version 1.0
SDS Number: 400000005356
Revision Date: 05/01/2017
3 / 11
methods
circumstances and the surrounding environment.
Use a water spray to cool fully closed containers.
Further information
:
Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.
Special protective equipment
for firefighters
:
In the event of fire, wear self-contained breathing apparatus.
Use personal protective equipment.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions,
protective equipment and
emergency procedures
:
Use personal protective equipment.
Ensure adequate ventilation.
Evacuate personnel to safe areas.
Material can create slippery conditions.
Environmental precautions
:
Discharge into the environment must be avoided.
Prevent further leakage or spillage if safe to do so.
Prevent spreading over a wide area (e.g. by containment or oil
barriers).
Retain and dispose of contaminated wash water.
Local authorities should be advised if significant spillages
cannot be contained.
Methods and materials for
containment and cleaning up
:
Contain spillage, and then collect with non-combustible
absorbent material, (e.g. sand, earth, diatomaceous earth,
vermiculite) and place in container for disposal according to
local / national regulations (see section 13).
Keep in suitable, closed containers for disposal.
Clean contaminated floors and objects thoroughly while
observing environmental regulations.
SECTION 7. HANDLING AND STORAGE
Advice on safe handling
:
For personal protection see section 8.
Do not swallow.
Avoid contact with eyes.
Keep container closed when not in use.
Conditions for safe storage
:
Keep in properly labelled containers.
Keep container tightly closed in a dry and well-ventilated
place.
Store in accordance with the particular national regulations.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Components
CAS-No.
Value type
(Form of
exposure)
Control
parameters /
Permissible
Basis