Owner`s manual

PureLink by Dtrovision
TABLE OF CONTENTS 88
can be interpreted as follows: (*) Starting the command code (255) Router ID is 255
(OS) Output Audio selection on CATx/Fiber ports on (O01) Output 01 to (A) Auto mode,
(O02) Output 02 to (M) embedded Audio, (O03) Output 03 to (S) 3.5mm Audio (!) take
the command. For a complete list of command characters and their functions, see
examples below.
Output CATx/Fiber Ports Audio Select
A: Auto, M: Embedded Audio, S: 3.5mm Stereo Audio
(M) Embedded Audio refers to embedded Audio from Input source side
(S) 3.5mm stereo Audio refers to inserted Audio from Output Board's 3.5mm stereo
jack
Example:
Command Codes Action
*255OSALLM!  Set all CATx/Fiber Output Audio selection to embedded
*255OSO01A,O02M,O03S!  Set CATx/Fiber Output Audio on Output 1 (Auto), Output 2
(embedded), and Output 3 (3.5mm stereo Audio)
*255OSO01-09M!  Set CATx/Fiber Output Audio on Output 1~9 embedded
OT: Output Test Pattern Select
The "OT" is an initiation command for Output test pattern selection. The characters and
numbers that follow the "OT" command tell the system, send test pattern to which
Output. The last character “!” is found at the end of a command code which tells the
system to execute the command.
 For test pattern command, Output #(s), resolution, and pattern type selection are
required
For example, the command code
*255OTO01T02P04! 
can be interpreted as follows: (*) Starting the command code (255) Router ID is 255
(OT) Output test pattern on (O01) Output 01 at (T02) resolution 1920 x 1200 and (P04)
256 Gray pattern (!) take the command. For a complete list of command characters and
their functions, see examples below.
Resolution Table Pattern Type Table
- T00: Test pattern disable -P00: Test pattern disable
- T01: 1024 x 768 - P01: Color bars