Owner`s manual

PureLink by Dtrovision
TABLE OF CONTENTS 80
It can be interpreted as follows: (*) Starting the command code (255) Router ID is 255 (D)
Disconnect on (I01) Input 01 to (O00) Output 00 (!) take the command. For a complete list of
command characters and their functions, see the command list below
To disconnect a switch:
Enter the Disconnect command below. Replace the “#”s with the Input and Output number(s).
*255DI#O#! 
Note) For PM-128X and PM-256X, input and output # uses three digit format, instead
of two digits. For example;
Input 01 (I001), Input 05 (I005), Output 01 (O001) and Output 100 (O100)
Examples (Disconnect Video and Audio):
Command Codes Action
*255DI01O00!  Disconnect both Video and Audio Input 1 to no Output (00)
*255DI00O03,04,05!  Disconnects both Video and Audio Outputs 3, 4, and 5
*255DI00O03-06!  Disconnects both Video and Audio Output 3, 4, 5, and 6
*255DALLIO!  Disconnects both Video and Audio all Inputs and Outputs
Examples (Disconnect Video only):
Command Codes Action
*255VDI01O00!  Disconnect Video Input 1 to no Output (00)
*255VDI00O03,04,05!  Disconnects Video Outputs 3, 4, and 5
*255VDI00O03-06!  Disconnects Video Output 3, 4, 5, and 6
*255VDALLIO!  Disconnects Video all Inputs and Outputs
Examples (Disconnect Audio only):
Command Codes Action
*255ADI01O00!  Disconnect Audio Input 1 to no Output (00)
*255ADI00O03,04,05!  Disconnects Audio Outputs 3, 4, and 5
*255ADI00O03-06!  Disconnects Audio Output 3, 4, 5, and 6
*255ADALLIO!  Disconnects Audio all Inputs and Outputs