Owner`s manual

PureLink by Dtrovision
TABLE OF CONTENTS 79
*255VCI001O001,I002O002,I0
03O003! 
Connect Video Input 1 to Output 1, Input 2 to Output 2, and
Input 3 to Output 3
*255VCI001O001,002,003!  Connect Video Input 1 to Output 1, 2, and 3
*255VCI001O001-007!  Connect Video Input 1 to Output 1, 2, 3, 4, 5, 6, and 7
Examples (Connect Audio only):
Command Codes Action
*255ACI01O01!  Connect Audio Input 1 to Output 1
*255ACI01O08,I08O02!  Connect Audio Input 1 to Output 8 and Input 8 to Output 2
*255ACI01O01,I02O02,I03O03!

Connect Audio Input 1 to Output 1, Input 2 to Output 2, and
Input 3 to Output 3
*255ACI01O01,02,03!  Connect Audio Input 1 to Output 1, 2, and 3
*255ACI01O01-07!  Connect Audio Input 1 to Output 1, 2, 3, 4, 5, 6, and 7
Examples for PM-128X and PM-256X (Connect Audio only):
Command Codes Action
*255ACI001O001!  Connect Audio Input 1 to Output 1
*255ACI001O008,I008O002!  Connect Audio Input 1 to Output 8 and Input 8 to Output 2
*255ACI001O001,I002O002,I0
03O003! 
Connect Audio Input 1 to Output 1, Input 2 to Output 2, and
Input 3 to Output 3
*255ACI001O001,002,003!  Connect Audio Input 1 to Output 1, 2, and 3
*255ACI001O001-007!  Connect Audio Input 1 to Output 1, 2, 3, 4, 5, 6, and 7
Disconnecting Switches
The characters and numbers in a Disconnect command tell the system which Input or Output
to disconnect. The “D” key initiates a Disconnect command for routing a switch. The
characters and numbers that follow the “D” command tell the system that Inputs and Outputs
to disconnect. The last character “!” is found at the end of the Command code, which tells the
system to execute the command.
For example, the command code :
*255DI01O00! 