Owner`s manual

PureLink by Dtrovision
TABLE OF CONTENTS 74
IV
Input Video select
- M: HDMI/SDI,
- S: DVI/CATx, Fiber,
- A: Auto mode)
Input Video select command; this
must precede Input # and Video
selection specification
2
IA
Input Audio select
- M: Embedded Audio,
- S: 3.5mm Stereo,
- A: Auto mode)
Input Audio select command; this
must precede Input # and Audio
selection specification
2
IM Input monitoring select
Input Video preview monitoring
select command : this must
precede Input #
2
IF Input channel information
Input channel information request
command : this must precede Input
#
2
IE
Input Extender Video select
(SP: VGA / SH: HDMI)
Input connected Extender's Video
select (CATx, Fiber only)
command : this must precede Input
# and Video selection
2
IP
Input Extender command
Transmission
Send command to the device that
is connected to the Input Extender
(CATx, Fiber only): this must
precede Input #, baud rate, timing
2
OM
Output HDMI/SDI port
Audio select
- M: Embedded Audio,
- S: 3.5mm Stereo,
- A: Auto mode)
Output HDMI/SDI port's Audio
select command; this must precede
Output # and Audio selection
2
OS
Output CATx/Fiber port
Audio select
- M: Embedded Audio,
- S: 3.5mm Stereo,
- A: Auto mode)
Output CATx/Fiber port's Audio
select command; this must precede
Output # and Audio selection
2
OT
Output Test Pattern Select
- T01: 1024 x 768
- T02: 1920 x 1200
- T03: 720 x 480p
- T04: 1280 x 720p
- T05: 1920 x 1080p
Output test pattern select
command: this must precede
Output #, resolution, and pattern
type
2