Owner`s manual

PureLink by Dtrovision
TABLE OF CONTENTS 58
4) Factory Reset
Factory reset will put the general setting back to the factory default mode.
Factory default setting value:
RS-232 Baud rate: 19200 Bps
IP Address: 192.168.000.002
Gateway: 192.168.001
Input/Output Connection: No Connection
Product ID: 255
 All Video/Audio switching connection becomes clear
 Serial communication setting will be restored back to the factory default
Baud Rate: 19200, Data Bits: 8, Parity: None, Stop Bits: 1
 LAN Communication setting will be restored back to the factory default
IP Address: 192.168.000.002
Gateway Address: 192.168.000.001
Subnet Mask: 255.255.255.000
 All Audio Output volume will be set to 0db
Input Board's Video will be set to SM: HDMI/SDI and Audio will be set to AS: Embedded
 Output Board's Audio will be set to 1S: Embedded, 2S: Embedded