Owner`s manual

PureLink by Dtrovision
TABLE OF CONTENTS 56
2) LAN
PM series Matrix Router can be controlled through the 10/100 base Ethernet port using either
GUI (graphic user interfaces) or a command line interface. The graphic user interfaces use a
standard web browser such as Microsoft Internet Explorer.
There are four values that need to be set for LAN communication; IP address, Gateway
address, Subnet mast, and Mac address. Click and select each value using touch screen and
push enter button to save. See pg. 47 for LAN cable termination
Note) Please contact your Network Administrator for network information to
avoid any IP conflict.
Factory default settings for LAN communication are:
IP Address: 192.168.000.002
Gateway Address: 192.168.000.001
Subnet Mask: 255.255.255.000
Mac Address: Matrix Router has its own MAC address and that MAC address
allows user to communicate with PC network solutions without any
communication conflict.
Use number key pad to set network information.
Use "." to move to the next section.