Owner`s manual

PureLink by Dtrovision
TABLE OF CONTENTS 54
This section is to switch Audio connection only. Select Input and Output numbers to route
source signal to destination devices and push "Enter" button on the bottom right to execute.
User can send select multiple Outputs for the Input
3) Video & Audio
This section is to switch Video and Audio connection together. Select Input and Output
numbers to route source signal to destination devices and push "Enter" button on the bottom
right to execute. User can send select multiple Outputs for the Input
4) Set All
"Set All" button is to select all the Output w/o pushing them individually.
5) Clear CH
"Clear CH" button is to clear all the Output t hat was selected w/o pushing them individually.
6) One to One
"One to One" button is to create an one to one connection between Input and Output; for
example, connect Input #1 to Output #1, Input #2 to Output #2, ~ Input #15 to Output #15,
Input #16 to Output #16.
7) Enter
"Enter" button is to execute the changes made.
8) Cancel
"Cancel" button is to cancel the changes made.