Owner`s manual

PureLink by Dtrovision
TABLE OF CONTENTS 44
○
6
Input 21,22,23,24 ○
18
Output 21,22,23,24
○
7
Input 25,26,27,28 ○
19
Output 25,26,27,28
○
8
Input 29,30,31,32 ○
20
Output 29,30,31,32
○
9
Input 33,34,35,36 ○
21
Output 33,34,35,36
○
10
Input 37,38,39,40 ○
22
Output 37,38,39,40
○
11
Input 41,42,43,44 ○
23
Output 41,42,43,44
○
12
Input 45,46,47,48 ○
24
Output 45,46,47,48
Install Board as follows;
1. Align the Board with metal guide rail
2. Gently slide the Board into the frame until it connects to the main frame
3. Tighten the top and bottom screw knobs (clockwise) to lock the Board to the main frame
Removing Board as follows;
1. Disconnect any connected cables
2. Loosen and pull the top and bottom screw knobs (counterclockwise) to unlock the
Board from the main frame
3. Gently slide Board out of the main frame
Installing the Matrix Router in a Rack
Note) When mount the Matrix Router in a rack, ensure that none of the fans
have restricted air flow
PM-16X is designed to be mounted in a standard 19'' (48.26 cm) AV rack. It takes 5 RU rack
space and it is recommended to have at least one empty rack unit space above and below of
the Matrix Router to prevent overheating.
Rack Installation Tips
 Write down the serial number (usually located on the bottom of the unit) in an easily
accessible location prior to installing the unit in a rack
 It is recommended to test unit to ensure the unit is working properly prior to installing the
unit in a rack
 It is recommended to use two or more people installing the unit in a rack
* PM-16X weighs approximately 28.20 pounds (12.4 kg) fully populated
 For HDMI or DVI Input and/or Output Boards, we recommend to use copper cable no
longer than 33 ft (10meters) for HD Video quality assurance. Above 33 ft (10meters), we