Owner`s manual

PureLink by Dtrovision
25
Function Key On/Off:
User can enable or disable the function key located on physical router’s front panel.
Example:
Command Codes
Action
*255K000!
Function key On/Off
* When using MX-800s HCIS8 input board, there will be two different types (HDMI & CAT5) of 8
input ports and they are selectable via front panel control or sending a command code.
Example:
Command Codes
Action
*255ITI01C!
Select CAT5 port on input #1
*255ITI01H!
Select HDMI port on input #1
*255ITI01A!
Auto sensing mode on input #1
*255ITALLC!
Select CAT5 port on all inputs
4-2 LAN CODE CONFIGURATION
4-2.1 Using TELNET protocol with LAN(TCP/IP)
The MX-800 router can be controlled from remote locations through the LAN port using WINDOWS XP
DOS prompts, hyper-terminal, or TELNET program (the control code is fully compliant with RS-232C).
Enter TELNET <Router IP
Address> in the DOS prompt