Owner`s manual

PureLink by Dtrovision

4-1.6 Baud Rate Setting

User can set baud rate for RS-232 command control.

1. Enter the Baud rate setting command below. Replace the “#”s with the input and

output number(s).

*255@#!

@001: Baud rate at 19200

@002: Baud rate at 38400

@003: Baud rate at 57600

@004: Baud rate at 115200

Example:

Command Codes

Action

*255@001! 

Set baud rate at 19200

*255@002! 

Set baud rate at 38400

*255@003! 

Set baud rate at 57600

*255@004! 

Set baud rate at 115200

Network Configuration:

User can check and set network configuration for LAN control.

Examples:

Command Codes

Action

*255NNI000! 

Check current Network Information

*255NIP192.168.000.004! 

Set IP address at 125.135.199.004

*255NSM255.255.255.000! 

Set Subnet Mask at 255.255.255.000

*255NGW192.168.000.001! 

Set Gate Way at 192.168.000.001

*255NMA00.00.C2.B0.20.05! 

Set Mac Address at 00.00.C2.B0.20.05

*255NPN3000! 

Set Port Number at 3000

Connection Checking:

User can check the connection status.

Example:

Command Codes

Action

*255H000! 

Check connection status