Owner`s manual

Installation and Connection Instructions
1. Turn off both the video source and the display before connecting any cables.
2. Connect DVI/HDMI cable between the source and RF6T/Stand-alone transmitter AND
between the RF6R/Stand-alone receiver and the display.
3. Cable Connection:
1) Fiber Cable: Connect LC terminated fiber optic cables according to the picture below;
2) CAT5 Cable: RT6T/RF6R was designed to conform to TIA/EIA-568-B Standard. Please
ensure that each PIN layout of RF6T/RF6R is corresponding with the picture below before
connecting the cable. Please note that CAT5e or above level cable enables to deliver better
video quality and longer distance.
Pin
TIA/EIA-568B
Signal
Wire color
Digital RGB
1
Orange/ White
TMDS Data2+
2
Orange
TMDS Data2-
3
Green/ White
TMDS Data1+
4
Blue
TMDS Data0+
5
Blue/ White
TMDS Data0-
6
Green
TMDS Data1-
7
Brown/ White
TMDS Clock+
8
Brown
TMDS Clock-