Owner`s manual

Installation and Connection Instructions
Installation Instruction
1. Turn off the video source and monitor before connecting any cable.
2. Connect DVI-D, VGA, Fiber, CAT5, and RS-232 cable.
3. Connect 12V DC power adapter to both transmitter and receiver module.
4. Turn on the monitor
5. Turn on the video source
How to connect LC fiber cable between TX and RX
TX : 1 -> RX : 1 , TX : 2 -> RX : 2
TX : 3 -> RX : 3 , TX : 4 -> RX : 4