DTS/DRS-1000RV Owner’s Manual DTS-1000RV: DVI/HDMI or VGA, Audio, RS-232C Transmitter Extender DRS-1000RV: DVI/VGA or VGA, Audio, RS-232C Receiver Extender PureLinkTM 535 East Crescent Avenue Ramsey, NJ 07446, USA Tel: 201.488.3232 Fax: 201.621.6118 www.purelinkav.com E-mail: sales@purelinkav.com For technical support, contact: support@purelinkav.
Package Contents Please make sure all of the following items are included in the package: 1) DTS-1000RV Transmitter Module or DRS-1000RV Receiver Module x 1 *The transmitter module and the receiver module are sold separately* 2) DC 12V power supply unit x 1 3) AC cord x 1 4) Owner’s Manual x 1
General Specification DTS1000RV/DRS1000RV is a floor box-type fiber-optic extension system capable of transmitting DVI/HDMI/VGA video, 3.5 stereo audio, and RS232-C composite signals to remote locations (max distance up to 1000m or 0.62 miles). DTS1000RV/DRS1000RV is equipped with readily available multimode fiber-optic and CAT5 cables, making this system a convenient and affordable solution for transmitting highquality video and audio signals in various applications.
Operation and Reliability Specification 1. Operating Environment Temperature : 50F ~ 104F (10℃~ 40℃) Humidity : 10% ~ 80% Altitude : 3,000m Max. 2. Transit Environment Temperature : -13F ~ 140F (-25℃~ 60℃) Humidity : 5% ~ 95% Altitude : 15,000m Max. 3. Storage Environment Temperature : -4F ~ -49F (-20℃~ 45℃) Humidity : 5% ~ 95% Altitude : 3,000m Max. 4.
Main Features 1. High Quality Picture - No Signal Loss and Digital Noise Free DTS-1000RV/DRS-1000RV is designed to deliver the highest quality picture preserving the native resolutions of the digital/analog video sources, or analog stereo audio, or RS232 communication without any signal loss. At the same time, the digital noises that may affect the picture quality will be eliminated.
Installation and Connection Instructions Installation Instruction 1. Turn off the video source and monitor before connecting any cable. 2. Connect DVI-D, VGA, Fiber, CAT5, and RS-232 cable. 3. Connect 12V DC power adapter to both transmitter and receiver module. 4. Turn on the monitor 5.
CAT5 cable DTS-1000RV/DRS-1000RV is designed to conform to TIA/EIA-568-B standards. Check whether the PIN MAP is properly connected to the TIA/EIA-568-B (as illustrated below) before use. (Note: CAT-5E or CAT-6 cables will deliver signal for longer distances).
PRODUCT DIMENSION Exterior Dimension (W*D*H): 4.3’x5.1’x1.6 mm, 1.
DRS-1000RV DVI/HDMI Fiber Optic Extension Module Receiver Front Panel: PWR: Power LED ST: Signal LED MODE: EDID Setting EDID S/W: EDID Save button Rear Panel: DVI Input (Tx), DVI Output (Rx) VGA Input (Tx), VGA Output (Rx) DVI or VGA Dip switch (Only on Tx side) Optical In /Out ports: Fiber optic connection Audio In (Tx), Audio Out(Rx) :3.
USER GUIDE Built-in Selector Switch: It will allows user to select between DVI + Stereo Audio or VGA + Stereo Audio signal Internal EDID DATA Select EDID data of your choice from the list below by adjusting MODE switch.
Technical Specification Data Transfer Speed: Frequency Range: Supporting Display Resolutions: Up to 2.25 Gbps (Single Link) 25 ~ 165 MHz Up to WUXGA (1920X1200)@60Hz / 1080p I/O Signal Standard: Max Distance: Digital RGB, VGA, Stereo Audio (3.5mm), RS-232 1,000m (3,300ft) at 1920x1200@60Hz / 1080p 1,500m (5,000ft) at 1600x1200@60Hz / 1080i Optical Source: Optical Cable Specification: 850 nm Vcsel Multimode 50/125 or, 62.
Warranty 2 (two) Year Warranty Dtrovision warrants this DTS-1000RV/DRS-1000RV fiber optic extender to be free from defects in workmanship and materials, under normal use and service, for a period of two (2) year from the date of purchase from Dtrovision or its authorized resellers.
FCC/CE Statement This device complies with part 15 of FCC Rules and EN 55022/55024/61000-3 for CE certification. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must not accept any interference received, including interference that may cause undesired operation.
UL Statement This device has completed a UL Commercial Inspection and Testing Services for the multimode HDMI cable complied with VW-1 under UL 758. It is validated by the UL file number SV2038 and project number 04CA05353.
