Technical information

Deltabar M PMD55
46 Endress+Hauser
Flow The following configuration data sheet has to be filled in and to be included in the order when the option
"L: Customized flow" has been selected in feature "090: Calibration; Unit" of the product structure.
P01-PMD55xxx-16-xx-xx-en-002
Pressure Engine ring Uniet
 Mass  Volume  Percent
 mbar  mmHO
2
 bar  mHO
2
 ftHO
2
 psi  inHO
2
 mmHg  Pa
 kPa
 kgf/cm
2
 MPa
Default: Volume; m /h
3
Output Characteristic
 linear (HART only)  square root ( )
default
Operation Point
Max Pressure _____ [pressure eng. unit] Max Pressure _____ [pressure eng. unit]
Max Flow _____ [flow unit] Max Flow _____ [flow unit]
LRV _____ [pressure eng. unit] LRV _____ [
flow unit]
(Lower Range Value ) (Lower Range Value )(HART only) (HART only)
Low flow cut off
Value: ______ [%]
( = 5%)default
Display Information
1st Value Display 2nd Value Display
Measured Value (PV)  none
 Pressure
 Totalizer 1
 Totalizer 2
 Current [mA]
 Main Measured Value (%)
 Temperature
Damping
Damping: ____ sec ( 2 sec)default
 kg/s
 kg/min
 kg/h
 t/s
 t/min
 t/h
 oz/s
 oz/min
 lb/s
 lb/min
 lb/h
Operation Norm Standard
Condition Condition Condition
 m/s
3
 Nm/s
3
 Sm /s
3
 m /min
3
 Nm /min
3
 Sm /min
3
 m/h
3
 Nm/h
3
 Sm /h
3
 l/s  Nm/d
3

Sm /d
3
 l/min  SCFS
 l/h  SCFM
 US Gal/s  SCFH
 US Gal/min  SCFD
 US Gal/h
 ACFS
 ACFM
 ACFH
 %
(default)
Flow Unit / Measured Value (PV)
1)
Depending on sensor and comunication variant
1)