Technical information

Deltabar M PMD55
Endress+Hauser 45
Level The following configuration data sheet has to be filled in and to be included in the order when the option
"K: Customized level" has been selected in feature "090: Calibration; Unit" of the product structure.
P01-PMD55xxx-16-xx-xx-en-001
 mbar  mmHO
2
 %  m  l  gal
 bar  mHO
2
 dm  hl  Igal
 ftHO
2
 cm
 psi  inHO
2
 mm  m
3
 ft
3
 in
3
 kg
 mmHg  Pa  inch  t
 ft  lb
 kPa
 kgf/cm
2
 MPa





(b)
(a)
50 mbar
500 mbar
100 m
3
3 m
3
Pressure Engineering Unit Output Unit (Scaled unit)
Empty calibration (a)
Empty pressure (a)
Low pressure value (empty)
[pres. eng. unit]
Damping
Damping: ____ sec (Default 2 sec)
Display Information
1st Value Display 2nd Value Display
Measured Value (PV) none (factory setting)
Pressure
Current [mA]
Measured value (%)
Temperature
High level value (full)
[Scaled Unit]
Full calibration (b)
Full pressure (b)
High pressure value (full)
[pres. eng. unit]
Low level value (empty)
[Scaled Unit]
Example
1)
1)
Depending on sensor and comunication variant