Technical information

Deltabar M PMD55
38 Endress+Hauser
Certificates and approvals
CE mark The device meets the legal requirements of the relevant EC directives. Endress+Hauser confirms that the
device has been successfully tested by applying the CE mark.
Ex approvals •ATEX
•FM
•CSA
•NEPSI
•IECEx
All explosion protection data are given in separate documentation which is available upon request. The Ex
documentation is supplied as standard with all devices approved for use in explosion hazardous areas.
 ä 42 ff, sections "Safety Instructions" and "Installation/Control Drawings".
Marine certificate (in
preparation)
• Germanischer Lloyd (GL)
• American Bureau of Shipping (ABS)
CRN approval Some device versions have CRN approval. For a CRN-approved device, a CRN-approved process connection
( ä 39 ff, feature 110 "Process connection") has to be ordered with a CSA approval ( ä 39 ff, feature 10
"Approval"). These devices are fitted with a separate plate bearing the registration number 0F13907.5C.
Pressure Equipment Directive
(PED)
PMD55 corresponds to Article 3 (3) of the EC directive 97/23/EC (Pressure Equipment Directive) and has
been designed and manufactured according to good engineering practice.
Standards and guidelines DIN EN 60770 (IEC 60770):
Transmitters for use in industrial-process control systems
Part 1: Methods for inspection and routine testing
DIN 16086:
Electrical pressure measuring instruments, pressure sensors, pressure transmitters, pressure measuring
instruments, concepts, specifications in data sheets
EN 61326-X:
EMC product family standard for electrical equipment for measurement, control and laboratory use.